PowerMaster SG-74 Commercial Slide Gate Operator 3/4 HP, 230/460V 3PH

PowerMaster SG-74 Commercial Slide Gate Operator 3/4 HP, 230/460V 3PH
PowerMaster SG Slide Gate Operator for use in Commercial and Industrial Applications for gates up to 50’ wide and 1,500 lbs.

• Use for up to 30 cycles per hour.
• Maximum gate weight: 1500 lbs.
• Maximum cycles per hour: 30 CPH.
• Maximum gate width: 50 feet.
• Gate speed: 9 inches per second.
• Class II low voltage control circuit.
• UL 325 Listed for use in Class I through IV application.
• Shipping weight: approx.
• 235 lbs.
• Shipping dimensions: 33″ x 17″ x 20″.
• Nitro board with 4-line LCD Display.
• Timer to close with 0-60 sec.
• Adjustment standard.
• Longer timer available upon request.
• Maximum run timer for equipment protection (self-adjusting).
• Master/Slave option with dedicated terminal connection provided.
• Easy Left/Right changeover.
• Time delay on reverse to ensure smooth gate motion and less stress on equipment.
• Spike suppressing circuitry for surge and lightning protection.
• Emergency control enabling circuitry for safety with security.
• Electrical dynamic or solenoid brake for precise gate positioning.
• Magnetic gate lock circuitry with control relay.
• Integral, speed sensing, anti-entrapment circuitry with independent opening and closing sensitivity adjustment.
• External anti-entrapment circuitry with separate terminal connections for easy installation of contact and non-contact sensors.
• Internal On/Off power switch.
• NEMA 1 three-button control station included.
• Selectable three second advanced audio warning signal Heavy duty #11 Ga.
• Galvanized steel frame providing a strong and durable unit.
• 40:1, oil bath type, gear reducer for long service and smooth, quiet operation.
• Heavy duty #50 drive chain with a spring loaded tensioning system for smooth starts, stops, and reversals.
• Heavy duty pillow block type ball bearings supporting output drive shaft and enabling extended endurance under heavy loads with low maintenance.
• Padlockable drive disconnect with brass slide for manual operation in case of power failure.
• Positive chain driven rotary limit switches for precision gate positioning.
• Settings are never affected by manual operation.
• Post or pad mountable for easy installation.

External control input terminal connections for:

• Radio Receiver.
• Push Button Control Station.
• Key Switches.
• Loop Detectors.
• Card Key Readers.
• Telephone Entry Systems, Etc.

Note: Over the Road freight charges apply.
IMPORTANT: Due to supply chain shortages we currently do not offer quantity discounts, and for some of our products we are limiting the quantities that may be purchased.